1Internal structure
The structure defines posture, movement and support.
Negozio
Rejoignez notre communauté
Passer aux informations sur le produit
S40-01 164 cm Irontech – Poupée réaliste en silicone intégral – Stock UE
€1.490,00 EUR
Payez en 3 fois sans intérêts avec Klarna ou PayPal au checkout.
Achat protégé, discret et assisté
Les informations essentielles restent visibles, avec délai indicatif et partenaires logistiques affichés clairement.
Livraison indicative
25–33 jours ouvrés
Corps déjà disponible en Allemagne ; la tête est produite en Chine puis expédiée. Irontech coordonne les deux expéditions en DDP.
Expédition discrète
Colis neutre, sans référence explicite.
Paiements sécurisés
Checkout protégé et moyens de paiement vérifiés.
Assistance humaine
Assistance avant et après commande en IT / EN / DE / FR / ES.
Transporteurs partenaires
Sélection indicative des transporteurs utilisés selon la destination et la disponibilité logistique.
DHL
UPS
FedEx
dpd
GLS
Un doute sur la configuration ?
Écrivez-nous avant la commande : nous vous aidons à choisir sans erreur.
Écrire sur WhatsApp
Le modèle en bref
MarqueIrontech Doll
FormatCorps entier
MatériauSilicone integrale
Hauteur164 cm
Remplissage poitrineGel Breasts
Détails du produit
Description et mesures du modèle, réunies dans un espace clair et toujours accessible.
Irontech S40-01 164 cm – poupée réaliste en silicone intégral
La Irontech S40-01 164 cm associe la tête S40-01 au corps Irontech MFS164 en silicone intégral, avec un teint Dark Tanned. La configuration repose exclusivement sur les données officielles Irontech, sans transférer de mesures ni de caractéristiques provenant d’autres SKU de corps.
Configuration incluse
La configuration vérifiée comprend un teint Dark Tanned, des seins en gel, des fesses en gel, un vagin fixe et des doigts articulés. La fiche de stock n’attribue aucune couleur d’yeux spécifique à la S40-01, elle n’est donc pas indiquée.
Corps MFS164
Le corps MFS164 a une hauteur nominale de 164 cm. Le poids et les mesures détaillées ne sont pas attribués car ils ne sont pas vérifiés pour ce SKU de corps spécifique dans les sources utilisées.
Seins et fesses en gel
La S40-01 est équipée de seins en gel et de fesses en gel. Les contenus techniques Irontech présents sur la page illustrent ces technologies sans présenter d’autres solutions de la gamme comme des équipements inclus.
Doigts articulés
Les doigts articulés font partie de la configuration officielle. Les informations techniques sur les mains restent séparées des caractéristiques effectivement incluses avec ce modèle.
Corps disponible en Europe et tête fabriquée en Chine
Le corps MFS164 est physiquement disponible dans l’entrepôt allemand d’Irontech. La tête S40-01 n’est actuellement disponible ni dans l’entrepôt UE ni dans le stock chinois et elle est donc fabriquée en Chine. Irontech coordonne les expéditions ; le trajet Chine–UE est livré en DDP, sans droits de douane supplémentaires pour le client, avec un délai indicatif de 25 à 33 jours.
Médias officiels et assistance Venera Dolls
La galerie utilise exclusivement les contenus officiels associés à la S40-01 164 cm Dark Tanned. Aucune photo de la S40 Natural ni d’un autre modèle n’est utilisée. Venera Dolls fournit une assistance italienne, la vérification de la configuration et une expédition discrète.
Irontech EU Stock configuration
Configuration, measurements, included accessories and real model media in one technical block.
01Included configuration+
MaterialSilicone integrale
Skin toneDark Tanned
BreastsSeno in gel
ButtocksGlutei in gel
VaginaVagina fissa
HandsDita articolate
EyesNeri
RANGE TECHNOLOGY
Evolution of the hand structure
Irontech technical comparison. The S1 EU Stock is specified with articulated fingers; this comparison is not presented as an additional included feature.
02Proportions & measurements+
Data for the 164 cm Irontech body. The stated weight refers to the body without head.
Altezza164 cm
Peso corpo42 kg
Seno81 cm
Sottoseno60.6 cm
Vita55 cm
Fianchi104.7 cm
Spalle36 cm
Braccio70.5 cm
Coscia59.5 cm
Polpaccio36 cm
Gamba76.5 cm
Piede21.2 cm
03Included accessories+
Official Irontech material shows the complete kit and the individual accessories listed below.
04EU Stock availability+
This SKU is managed at the Irontech warehouse in Germany. Complete-unit availability depends on both the S1 head and compatible PFS164 body being available.
MAGAZZINOIrontech Germany – EU Stock
Indicative preparation3–10 business days
SKUEU-MFS164-S40-01
05Factory pictures+
Real production images supplied by Irontech to document the model head, body and finishing.
When realism becomes presence.
Irontech’s signature lives in proportion, surface finish and the way every detail works together. The result is sensual, refined and believable — designed to hold your attention even up close.
IRONTECH DOLL · BEAUTY INSPIRED CREATION
Where engineering becomes presence.
Irontech works on form, material and finish with one clear objective: turn engineering and manual craftsmanship into believable proportions, refined surfaces and a natural visual presence.
REALISM · INNOVATION · CRAFT
From scanning to final form.
Scanning, sculpting and modelling work together to build believable proportions and a recognizable identity. The process is technical; the result should feel natural.
IRONTECH · DESIGN PROCESS
Form before effect.
Realism begins before finishing: proportions, volumes and lines are defined and compared before they become the final product.
Material, precision, control.
From the internal structure to final colouring, each stage prepares the next. Stability, surface and finishing become part of the same result.
1Internal structure
2Silicone preparation
Material is prepared for continuity and consistency.
3Moulding
Silicone takes shape around the internal structure.
4Trimming
Excess material is removed and edges are refined by hand.
5Cleaning
The surface is prepared for the final stages.
6Colouring
Tone and detail complete visual depth and naturalness.
Quality you can verify.
Alongside visual craftsmanship, Irontech provides documentation and third-party audit material relating to production and materials. Premium should be more than a promise: it should be possible to read and verify.
Documents are shown in their original context. Each certificate or audit applies only to the scope, material or process identified in that document.
ENGINEERING NOTE · IRONTECH DEVELOPMENT
The hand structure continues to evolve, too.
Irontech documents the development of its internal architecture, from the traditional articulated structure to a newer ball-jointed solution designed to improve finger fluidity and control.
Configuration note: the S1 164 cm EU Stock shown on this page uses the articulated fingers stated in the technical specification. The ball-jointed solution shown in the comparison represents a more recent development within the range and is not the configuration of this unit.Care & use
A premium real doll lasts over time only if it’s cared for properly. Here you’ll find clear, practical guidance — no fluff.
How do I clean a real doll properly?
+
After each use, wash the relevant areas with lukewarm water and mild, neutral soap. Avoid harsh detergents, alcohol, solvents, or scented products.
Always dry with a soft cloth or natural airflow.
What’s the difference between silicone, TPE and S-TPE?
+
Silicone is more durable, less porous, and generally requires less maintenance. TPE is softer but needs thorough drying and more careful handling. S-TPE is an improved version with greater stability.
Which lubricants can I use?
+
Use water-based lubricants only. Never use silicone-based lubricants on TPE or S-TPE. For silicone models, we still recommend water-based to preserve the surface.
How can I prevent stains and discoloration?
+
Avoid prolonged contact with dark fabrics, denim, synthetic leather, or heavily dyed materials. Use light-colored sheets and protective covers.
How do I dry the doll properly?
+
After washing, always dry completely — especially folds and cavities. Residual moisture is the main cause of mold and odor.
How should I store it when I’m not using it?
+
Store in a natural position, away from direct light and heat sources. Ideal temperature: 18–24°C (64–75°F). Do not leave it compressed.
How can I transport it safely?
+
Always support the body; never lift the doll by limbs or head. Use padded packaging and keep a neutral posture.
Can small damages be repaired?
+
Yes. Small cuts or scratches can be repaired with specific silicone or TPE repair kits. If in doubt, contact support before attempting any repair.
How long does a premium real doll last?
+
With proper care, a premium doll can last for many years while maintaining aesthetics and function.
What should I do if I have a problem?
+
Contact support with photos or a short video. We’ll guide you step by step to the safest solution.
You’re not alone after purchase.
Dedicated support in Italian, English, and Spanish.
Real photos before shipping, discreet packaging, real human help.
Shipping, privacy & support
Here are the answers that truly matter: discretion, timing, tracking, real photos before shipping, and after-sales support.
How does shipping work?
+
We ship with reliable couriers and active tracking. Orders are handled discreetly and protected, with reinforced packaging to reduce transit risk.
Is the package discreet? Will it reveal what’s inside?
+
No. The package is neutral, with no logos or references to the content. The label is also set up to maximize discretion.
How long does delivery take?
+
Timing depends on availability and your model configuration. In general, after final confirmation and dispatch, you’ll receive tracking and updates until delivery.
Will I receive real photos before shipping?
+
Yes. Before shipping, you can receive real photos of the finished product, so you know exactly what’s being sent and can confirm everything is correct.
Are there extra costs or customs fees?
+
For EU shipping, customs fees are generally not expected. Any extras depend on the destination and optional services, and we always communicate them in advance.
Can I track the shipment?
+
Yes. As soon as the parcel ships, you’ll receive a tracking code and can follow each update until delivery.
What happens after I place an order?
+
After purchase, we contact you to confirm details and minimize mistakes. If you selected options or customizations, we verify everything before dispatch.
If I have an issue, how does support work?
+
Contact us and include photos or a short video. We reply with clear, practical instructions. The goal is a safe resolution — no bouncing around.
No surprises, no ambiguity. We tell it as it is — and we actually stay with you.
Discreet packaging
Neutral, reinforced packaging with no references to the contents. Zero unnecessary exposure.
Pre-shipping photos
Before it ships, you can verify with real photos that everything is correct and compliant.
Real human support
Support in Italian, English, and Spanish. Practical, fast answers — no fluff.