1Internal structure
The structure defines posture, movement and support.
Negozio
Únete a nuestra comunidad
Pasa toda la información sobre el producto
S1-01 164 cm Irontech – Sex Doll Realista de Silicona Integral – Stock UE
€1.490,00 EUR
Paga en 3 plazos sin intereses con Klarna o PayPal en el checkout.
Compra protegida, discreta y asistida
La información esencial permanece visible, con plazo orientativo y socios logísticos mostrados con claridad.
Entrega orientativa
25–33 días laborables
Cuerpo ya disponible en Alemania; la cabeza se produce en China y después se envía. Irontech coordina ambos envíos con DDP.
Envío discreto
Paquete neutro, sin referencias explícitas.
Pagos seguros
Checkout protegido y métodos de pago verificados.
Soporte humano
Asistencia antes y después del pedido en IT / EN / DE / FR / ES.
Transportistas asociados
Selección orientativa de transportistas utilizados según destino y disponibilidad logística.
DHL
UPS
FedEx
dpd
GLS
¿Dudas sobre la configuración?
Escríbenos antes del pedido: te ayudamos a elegir sin errores.
Escríbenos por WhatsApp
El modelo en resumen
MarcaIrontech Doll
FormatoCuerpo completo
MaterialSilicone integrale
Altura164 cm
Relleno de pechoGel Breasts
Detalles del producto
Descripción y medidas del modelo, reunidas en un espacio claro y siempre accesible.
Irontech S1-01 164 cm es una sex doll realista de silicona integral, configurada con la cabeza S1-01 y el cuerpo PFS164. La configuración oficial verificada para el stock UE incluye tono Natural, pechos de gel, glúteos de gel, vagina fija, dedos articulados y ojos marrones.
El cuerpo PFS164 mide 164 cm y pesa aproximadamente 42 kg. Medidas verificadas: busto 81 cm, bajo pecho 60,6 cm, cintura 55 cm, caderas 104,7 cm, hombros 36 cm, brazo 70,5 cm, muslo 59,5 cm, pantorrilla 36 cm, pierna 76,5 cm y pie 21,2 cm.
Esta configuración forma parte del stock europeo de Irontech en Alemania. La disponibilidad de la doll completa depende de que el cuerpo PFS164 y la cabeza S1-01 estén disponibles al mismo tiempo. Actualmente hay 6 unidades del cuerpo, mientras que la cabeza S1-01 no está disponible en el almacén de la UE; por lo tanto, la configuración completa no puede comprarse en este momento.
Las imágenes mostradas en esta página proceden de la carpeta oficial de Irontech asociada a esta configuración.
Irontech EU Stock configuration
Configuration, measurements, included accessories and real model media in one technical block.
01Included configuration+
MaterialSilicone integrale
Skin toneNaturale
BreastsSeno in gel
ButtocksGlutei in gel
VaginaVagina fissa
HandsDita articolate
EyesMarroni
RANGE TECHNOLOGY
Evolution of the hand structure
Irontech technical comparison. The S1 EU Stock is specified with articulated fingers; this comparison is not presented as an additional included feature.
02Proportions & measurements+
Data for the 164 cm Irontech body. The stated weight refers to the body without head.
Altezza164 cm
Peso corpo42.0 kg
Seno81.0 cm
Sottoseno60.6 cm
Vita55.0 cm
Fianchi104.7 cm
Spalle36.0 cm
Braccio70.5 cm
Coscia59.5 cm
Polpaccio36.0 cm
Gamba76.5 cm
Piede21.2 cm
03Included accessories+
Official Irontech material shows the complete kit and the individual accessories listed below.
04EU Stock availability+
This SKU is managed at the Irontech warehouse in Germany. Complete-unit availability depends on both the S1 head and compatible PFS164 body being available.
MAGAZZINOIrontech Germany – EU Stock
Indicative preparation3–10 business days
SKUEU-PFS164-S1-01
05Factory pictures+
Real production images supplied by Irontech to document the model head, body and finishing.
06Demonstration video+
Official Irontech S1 164 cm demonstration video integrated directly into the product page.
When realism becomes presence.
Irontech’s signature lives in proportion, surface finish and the way every detail works together. The result is sensual, refined and believable — designed to hold your attention even up close.
IRONTECH DOLL · BEAUTY INSPIRED CREATION
Where engineering becomes presence.
Irontech works on form, material and finish with one clear objective: turn engineering and manual craftsmanship into believable proportions, refined surfaces and a natural visual presence.
REALISM · INNOVATION · CRAFT
From scanning to final form.
Scanning, sculpting and modelling work together to build believable proportions and a recognizable identity. The process is technical; the result should feel natural.
IRONTECH · DESIGN PROCESS
Form before effect.
Realism begins before finishing: proportions, volumes and lines are defined and compared before they become the final product.
Material, precision, control.
From the internal structure to final colouring, each stage prepares the next. Stability, surface and finishing become part of the same result.
1Internal structure
2Silicone preparation
Material is prepared for continuity and consistency.
3Moulding
Silicone takes shape around the internal structure.
4Trimming
Excess material is removed and edges are refined by hand.
5Cleaning
The surface is prepared for the final stages.
6Colouring
Tone and detail complete visual depth and naturalness.
Quality you can verify.
Alongside visual craftsmanship, Irontech provides documentation and third-party audit material relating to production and materials. Premium should be more than a promise: it should be possible to read and verify.
Documents are shown in their original context. Each certificate or audit applies only to the scope, material or process identified in that document.
ENGINEERING NOTE · IRONTECH DEVELOPMENT
The hand structure continues to evolve, too.
Irontech documents the development of its internal architecture, from the traditional articulated structure to a newer ball-jointed solution designed to improve finger fluidity and control.
Configuration note: the S1 164 cm EU Stock shown on this page uses the articulated fingers stated in the technical specification. The ball-jointed solution shown in the comparison represents a more recent development within the range and is not the configuration of this unit.Care & use
A premium real doll lasts over time only if it’s cared for properly. Here you’ll find clear, practical guidance — no fluff.
How do I clean a real doll properly?
+
After each use, wash the relevant areas with lukewarm water and mild, neutral soap. Avoid harsh detergents, alcohol, solvents, or scented products.
Always dry with a soft cloth or natural airflow.
What’s the difference between silicone, TPE and S-TPE?
+
Silicone is more durable, less porous, and generally requires less maintenance. TPE is softer but needs thorough drying and more careful handling. S-TPE is an improved version with greater stability.
Which lubricants can I use?
+
Use water-based lubricants only. Never use silicone-based lubricants on TPE or S-TPE. For silicone models, we still recommend water-based to preserve the surface.
How can I prevent stains and discoloration?
+
Avoid prolonged contact with dark fabrics, denim, synthetic leather, or heavily dyed materials. Use light-colored sheets and protective covers.
How do I dry the doll properly?
+
After washing, always dry completely — especially folds and cavities. Residual moisture is the main cause of mold and odor.
How should I store it when I’m not using it?
+
Store in a natural position, away from direct light and heat sources. Ideal temperature: 18–24°C (64–75°F). Do not leave it compressed.
How can I transport it safely?
+
Always support the body; never lift the doll by limbs or head. Use padded packaging and keep a neutral posture.
Can small damages be repaired?
+
Yes. Small cuts or scratches can be repaired with specific silicone or TPE repair kits. If in doubt, contact support before attempting any repair.
How long does a premium real doll last?
+
With proper care, a premium doll can last for many years while maintaining aesthetics and function.
What should I do if I have a problem?
+
Contact support with photos or a short video. We’ll guide you step by step to the safest solution.
You’re not alone after purchase.
Dedicated support in Italian, English, and Spanish.
Real photos before shipping, discreet packaging, real human help.
Shipping, privacy & support
Here are the answers that truly matter: discretion, timing, tracking, real photos before shipping, and after-sales support.
How does shipping work?
+
We ship with reliable couriers and active tracking. Orders are handled discreetly and protected, with reinforced packaging to reduce transit risk.
Is the package discreet? Will it reveal what’s inside?
+
No. The package is neutral, with no logos or references to the content. The label is also set up to maximize discretion.
How long does delivery take?
+
Timing depends on availability and your model configuration. In general, after final confirmation and dispatch, you’ll receive tracking and updates until delivery.
Will I receive real photos before shipping?
+
Yes. Before shipping, you can receive real photos of the finished product, so you know exactly what’s being sent and can confirm everything is correct.
Are there extra costs or customs fees?
+
For EU shipping, customs fees are generally not expected. Any extras depend on the destination and optional services, and we always communicate them in advance.
Can I track the shipment?
+
Yes. As soon as the parcel ships, you’ll receive a tracking code and can follow each update until delivery.
What happens after I place an order?
+
After purchase, we contact you to confirm details and minimize mistakes. If you selected options or customizations, we verify everything before dispatch.
If I have an issue, how does support work?
+
Contact us and include photos or a short video. We reply with clear, practical instructions. The goal is a safe resolution — no bouncing around.
No surprises, no ambiguity. We tell it as it is — and we actually stay with you.
Discreet packaging
Neutral, reinforced packaging with no references to the contents. Zero unnecessary exposure.
Pre-shipping photos
Before it ships, you can verify with real photos that everything is correct and compliant.
Real human support
Support in Italian, English, and Spanish. Practical, fast answers — no fluff.